RAL ACRYLIC PREMIUM
RAL Acrylic Premium is an innovative paint due to the quality of its formulation and its raw materials. With a single danger pictogram, rapid drying, strong coverage and a regular, smooth tension without dripping, it is both safer, easier and more efficient to use than market standards.
PROPERTIES OF ACRYLIC TOUCH UP PAINT PREMIUM
- No primer required on metal surfaces
- High coverage
- Fast drying
- Interior and exterior
ONE PICTOGRAM
CARACTERISTICS OF THE ACRYLIC TOUCH UP PAINT
 |
 |
 |
 |
 |
|
RAL 1003 - SIGNAL YELLOW GLOSS |
RAL 1023 - TRAFFIC YELLOW GLOSS |
RAL 2010 – SIGNAL ORANGE GLOSS |
RAL 3020 - TRAFFIC RED GLOSS |
RAL 5002 - ULTRAMARINE BLUE GLOSS |
 |
|
|
|
|
| RAL 6005 - MOSS GREEN GLOSS Ref : 424120USCAN |
RAL 7001 - SILVER GREY GLOSS Ref : 424124USCAN |
RAL 9005 - JET BLACK GLOSS Ref : 424131USCAN |
RAL 9005 - JET BLACK MAT Ref : 424133USCAN |
RAL 9016 - TRAFFIC WHITE GLOSS Ref : 424138USCAN |
Composition
Binder: acrylic
Solvent: blend of solvents, free from lead and heavy metals
Propellant: dimethyl ether
APPLICATION METHOD OF THE ACRYLIC TOUCH UP PAINT
- Thoroughly shake the aerosol for at least 2 minutes before use to ensure the pigments are correctly mixed.
- The surface must be clean, dry and free from grease. Degrease the surface to be treated, remove rust and dust.
- Spray at a distance of 25 cm from the surface.
- Best results are obtained by applying several thin coats in different directions rather than a single thick coat.
- Coverage approximately 2m² per can according to the application conditions and the state of the surface to be treated.
- If appropriate, carry out a test on an unobtrusive area beforehand to verify the compatibility of the paint with the surface.
HEALTH AND SAFETY
CLP labelling with a single pictogram.
Dangerous. Follow the precautions.
H222 Extremely flammable aerosol.H229 Pressurised container: May burst if heated.
H229 Pressurised container: May burst if heated.