ADHESION PRIMER

ADHESION PRIMER

High quality universal primers, offering rapid drying and high coverage, ideal for surface preparation (metal, wood, plastic and many others) before paint-spraying. Can be used on bare steel and lightly rusted surfaces. Also suitable for plastic and wood.

PROPERTIES OF ADHESION PRIMER

  • Excellent adhesion (for both smooth and porous surfaces), covers well and is easy to sand
  • Corrosion-resistant
  • Heat resistance: 110°C
  • Dust dry after 10 to 15 minutes
  • Touch dry after 15 to 25 minutes
  • Leave to dry for 12 hours between coats

(Figures given for information only, actual data’s will depend on the temperature, paint thickness, humidity etc)

FOUR PICTOGRAMS

produit toxique goodproduit inflammablepicto dangereux pour la santeproduit sous haute pressionproduit dangereux pour lenvironnement

 

CARACTERISTICS OF THE ADHESION PRIMER

1 color

marquage ligne gris 

Grey
Ref : 4601034SCAN

COMPOSITION OF THE ADHESION PRIMER

Binder: acrylic

Solvent: blend of solvents

Propellant: dimethyl ether

APPLICATION METHOD OF ADHESION PRIMER

  • Thoroughly shake the aerosol for at least 2 minutes before use to ensure the pigments are correctly mixed.
  • The surface must be clean, dry and free of grease. Remove all residues of varnish, rust, etc, then sand. When using out-of-doors, remove any moss or algae present on the surface. Cover the surrounding areas.
  • Spray at a distance of 25 cm from the surface. Best results are obtained by applying several thin coats in different directions rather than a single thick coat.
  • Leave to dry for approximately 20 minutes between coats.

HEALTH AND SAFETY

GHS labelling with three pictograms.