Tracing Sport : grass line marking paint
The very resistant line marking paint
TRACING® line marking paint is used to mark-out surfaces and optimise traffic flows bothTRACING® line marking paint is used to mark-out surfaces and optimise traffic flows bothindoors and out: logistics warehouses, sports centres, grass sports fields, cycle paths or car parks.TRACING® is ideal for marking-out floors and other ground surfaces in low-traffic areas.The 750ml offers the best value for money for outdoor marking. This is the best quality / price compromise for outside line marking.
Properties of the Tracing Sport
- Crisp and precise marking thanks to its purpose-designed nozzle.
- Rapid drying (15-20 min).
- Excellent coverage.
- Specially-designed formulation that will not damage the grass.
- Weatherproof for long-term marking.
- Temperature of use: +5° to 50°C.
Only 2 pictograms
Easy application with our Tracing Sport trolley
Caracteristics of the Tracing Sport
7 colors
 |
 |
 |
 |
 |
 |
|
White Tracing Sport |
Blue Tracing Sport |
Yellow Tracing Sport |
Black Tracing Sport |
Red Tracing Sport |
Green Tracing Sport |
Marking datas
|
Line width 4 cm to 10cm |
1 x 750 ml aerosol | ||
| a single coat | 2 coats | ||
| One slow application | 100 m | 50 m | |
| Rapid application | 150 m | 75 m | |
Composition of the Tracing Sport
Binder: acrylic.
Pigments: mineral and organic, free from lead and cadmium.
Solvents: a complex blend free from chlorinated solvents and aromatic compounds (toluene, xylene, etc).
Propellant: a specific mix of isobutane and propane
Application method of the Tracing Sport
Manually or using our application equipment (line marking trolleys, spray gun handle, ou One-wheel marking paint applicator).
Drying Time: 15 to 20 min.
Health and safety
Safety data sheets are available free of charge onthe internet: www.quick-fds.com.
GHS labelling with a single pictograph.
Recommendation for use
Use head down, adjust the position of the aerosolin the equipment used to give an application height that produces the desired line width.
BEFORE USE: Shake the can vigorously in anupside down position to thoroughly mix the paint, continue shaking even after having clearly heardthe ball bearings.
AFTER USE: Purge head up (until gas only comesout) to clean the valve and nozzle.
General conditions for use
For a good quality line, the first coat should be applied quickly (print layer); however the second and optional third coats should be applied more slowly to obtain the desired coverage.
For maximum visibility, a 2-coat application (with a rapid first application) is recommended.
Marking applied to wet or damp grass will have a shorter life. Whenever possible apply to dry ground.
Recommendations for use:
Use head down, adjust the position of the aerosol in the equipment used to give an application height that produces the desired line width.
BEFORE USE: Shake the can vigorously in an upside down position to thoroughly mix the paint, continue shaking even after having clearly heard the ball bearings.
AFTER USE: Purge head up (until gas only comes out) to clean the valve and nozzle.
Downloads
Applications
